If you have a cell phone and for any reason like to unlock,upgrade or update you may decide to flash it,it is simple with the tutorials that i’m going to share with you right here.
A full flash could mean just upgrading or downgrading to a different version of the operating system on your device. Or just installing a fresh operating system. Flashing your phone may void your phone’s warranty and it may render your phone useless if not properly done!
Firstly you must be sure you are using firmware[rom] that is compatible with your device, if you are not going to use the stock firmware of your device model. To find the phone model go to settings -About phone or check the back beneath the battery.
NOTE: This tutorials is for flashing a device using the device’s stock firmware on MTK and SPREADTRUM DEVICES [most Chinese phones] .
preparing the file
Extract the downloaded files to a separate folder and name it something that you can remember in computer , open the flash tool and click CHOOSE or SCATTER LOADING to select the firmware scatter file ,from the folder where you extracted it to, once loaded jump to step 3
connecting the phone
Connect the USB cable to the computer USB port,don’t connect the other end of USB cable to device yet,switch off the device , Now go to the flash tool up left and click on DOWNLOAD. Quickly connect the other end of the USB cable to phone .
NOTE: at this point you may have to press the power key or volume keys for computer to detect it.Sit back while the device is being flashed. when it’s completed unplug and switch the device ON. enjoy.
If you have any issue comment below